TUB DRAIN EXTRACTOR HOW TO
TUB DRAIN EXTRACTOR FREE

WARNING: WARNING: CANCER AND REPRODUCTIVE HARM. drive ratchet or can be used with 1-3/4 in. Patented tapered helical knurl bites into the drain and will not slip.Hardened steal design with a golden zinc plated finish.tub drains with broken or corroded cross hairs The more torque that is applied to the tool the more it will bite' into the drain and it will not slip-It's that simple. Simply drop the tool in the drain and turn it counterclockwise with a 1/2 in. This time saving tool does all the work with its helical knurl design. Never again will you need to chisel and hammer out the old drain and risk cracking the tub. Extractor to remove those stubborn 1-1/2 in. If your drain fitting doesn’t have metal crossbars, you’ll need to remove it with a tub drain extractor that’s designed to grip the inside walls of the drain fitting.When the crosshairs on your old tub drain are corroded and/or missing and the average drain removal tool fails, use the Tub Drain.It should be loose enough after a few rotations to be unscrewed the rest of the way by hand. You can also try using a pair of needle-nose pliers to grip the X and unscrew the drain fitting.(There are two ends to the wrench use the side that offers the best fit.) If your drain fitting has these crossbars, insert a drain wrench into the cross shape and turn counterclockwise to unscrew it. Most drain fittings feature a metal “X” that keeps objects from falling in.The putty should give way, releasing its grip on the drain fitting. Soften it with a hairdryer or heat gun, applying hot air directly into the drain for a few minutes.Most drains will have been fitted during installation with plumber’s putty that’s now hardened.If there’s a screen or strainer in the bathtub, pry it off with a flathead screwdriver (removing any screws first).The rest of the hardware should follow jiggle as necessary to loosen the entire structure and pull it out. To take it out, remove the screws from the faceplate of the trip lever, then carefully pull the faceplate away.The stopper of the plunger-style setup is found inside the drainpipe, not near the drain opening.If it doesn’t come out easily, jiggle it gently as you pull up. For a pop-up stopper, flip the lever to open the drain and pull the stopper straight up along with the metal (“rocker”) arm that extends through the drainpipe.

TUB DRAIN EXTRACTOR FREE

Turn the stopper counterclockwise until it’s free from the mounting post, and then remove the mounting post with pliers.If there is one, unscrew it using a screwdriver or hex key. Hold the body of the stopper and turn the knob to look for a set screw on the knob.

For the lift-and-turn, set the drain to open.

For increased leverage, hold onto the body with a towel and use a pair of pliers to turn the knob. I have a grungy looking tub drain thats been in place for over 30 years.

To remove a push-pull stopper, set it in the open position and turn the knob counterclockwise with one hand while holding the body of the stopper in the other.

Toe-touch stoppers are relatively easy to remove-just pop open the stopper and unscrew the shaft cylinder by turning it counterclockwise. The pop-up typically features a visible stopper that’s raised or lowered by the trip lever, while the plunger relies on an internal stopper to block the water when the lever is activated in those setups, the drain is typically covered by a screen or strainer. If your stopper is connected to a trip lever mechanism, it’s either a pop-up model or plunger-style (also known as a bucket stopper). Finally, the lift-and-turn resembles the push-pull, but it requires you to lift and turn the stopper (clockwise to close, counterclockwise to open). The push-pull features a center knob that you push in to close or pull out to open. The toe-touch stopper pops open and shut when you press on it. Three common models that don’t rely on a trip lever mechanism are the toe-touch, the push-pull, and the lift-and-turn. There are many types of bathtub stoppers.

TUB DRAIN EXTRACTOR HOW TO

How to Clear a Clogged Bathtub Drain Steps to Remove a Bathtub Drain Step 1: Identify the stopper

Tub drain extractor